User guide

www.netcommwireless.com
NetComm Wireless NF7 User Guide
57
VLAN
The VLAN page provides you with the ability to create Virtual Local Area Networks (VLANs). A VLAN is layer-2 network which has
been partitioned to create multiple distinct broadcast domains. The purpose of this is to isolate packets so that they may only
pass between these broadcast domains via one or more routers.
OPTION
DEFINITION
Ethernet
The number of the physical port on the rear of the router for which the VLAN will be
created.
WAN/LAN The function of the port. Port 1 only functions as a WAN port.
VID
The Virtual LAN ID you want to assign to the VLAN.
Tx TAG
Selecting this option will tag packet headers with the VLAN ID.
To adjust advanced WAN VLAN settings for a particular VID, click the WAN VLAN Settings button. The following window is
displayed:
OPTION
DEFINITION
VID
Use the drop down list to select the VID you want to configure.
Routing Type
Use the drop down list to type of routing for the selected VID.
DHCP Setting
Displays the current DHCP setting.
Setting Routing Type to Bridge displays further options:
OPTION
DEFINITION
VID
Use the drop down list to select the VID you want to configure.
Routing Type
Use the drop down list to type of routing for the selected VID.
WAN type
Use the drop down list to select which WAN type the VLAN uses.
WAN Map VLAN ID
Enter the VLAN ID to tag packets on the WAN interface.