User guide

www.netcommwireless.com
NetComm Wireless NF7 User Guide
55
IPv6
The IPv6 page enables you to configure the settings used for an IPv6 connection (if supported by your Internet Service Provider).
OPTION DEFINITION
IPv6
Select to enable or disable IPv6 functionality.
IPv6 Interface The IPv6 interface you wish to configure.
IPv6 Connection
Select the type of IPv6 connection to utilise for your service. You can select from:

Static IPv6

DHCPv6

PPPoE

6 to 4

IPv6 in IPv4 Tunnel

PPPoA
Select the type of connection as required by your Internet Service Provider for their IPv6 service.
DNS Setting
Select whether to automatically obtain DNS Server addresses or use the ones you manually specify.
Primary DNS Address
Enter the Primary DNS Address for the IPv6 connection.
Secondary DNS Address
Enter the Secondary DNS Address for the IPv6 connection.
LAN IPv6 Address
The IP Address to use for the IPv6 service connection.
LAN IPv6 Link-Local Address
The current local LAN IPv6 address of the NF7.
Autoconfiguration
Select to enable or disable IPv6 auto configuration (if supported by your Internet Service Provider).
Autoconfiguration Type
Select the appropriate type of auto configuration mode as required by your Internet Service Provider for their IPv6 service.
Router Advertisement Lifetime
Enter the length of time between the router advertising its availability on the IPv6 connection.