User guide

32
NetComm Wireless NF7 User Guide
www.netcommwireless.com
Change Password
This page allows you to change the NF7 web configuration password.
Type in the old password (the factory default username and password is admin) and then type in the new password.
Re-enter the new password in the Reconfirm field and click Save.
Port Configuration
The port configuration page allows you to configure the mode of each of the Ethernet ports on the rear of the device. By default
they are all set to
Auto which means they can automatically detect and select the highest speed common to both connected
devices. If you require to restrict the speed of any of the ports, you may use the drop down lists for the appropriate port to select
100Mbps / Full Duplex, 10Mbps / Full Duplex, 100Mbps / Half Duplex or 10Mbps / Half Duplex as required.
When you have finished configuring the ports, click the Save button to confirm the settings.