User guide

24
NetComm Wireless NF7 User Guide
www.netcommwireless.com
Network Setup
Network Setup
This page allows you to configure the Ethernet WAN (Wide Area Network) connection settings on the NF7.
Ethernet WAN
WAN Type: You can select from the following WAN types:-
Dynamic IP
Static IP
PPP over Ethernet
PPTP
L2TP
Dynamic IP Address
OPTION
DEFINITION
WAN Interface The interface to configure.
WAN Type
Use the drop down list to select the type of WAN connection you want to use.
Host Name
Set the hostname for your connection
(Optional - Refer to your ISP for more information) .
ISP Registered MAC Address
You can change the WAN port MAC address if needed to clone your 3G modem
(Optional - Refer to your ISP for more information) .
NAT
This option enables or disables "Network Address Translation" for this connection type.
Multicast
Allows you to select the method of multicast or disable it.
IGMP Snooping
Allows you to enable or disable IGMP Snooping. IGMP Snooping configures the router to listen to IGMP conversations
between hosts and routers and maintain a map of the links that need IP multicast streams.
VLAN TAG
VLAN tagging is primarily used in virtual networks which span over multiple switches. VLAN tagging involves the router
inserting a VLAN ID into a packet header in order to identify which CLAN the packet belongs to. You may enable VLAN
tagging and specify the ID with a value between 1 and 4094.
VLAN PRI
The priority of the VLAN