User guide

www.netcommwireless.com
NetComm Wireless NF7 User Guide
13
Hardware installation
1. Connect the power adapter to the Power socket on the back of the NF7.
2. Plug the power adapter into the wall socket and switch on the power.
3. Wait approximately 60 seconds for the NF7 to power up.
Connecting via a cable
1. Connect the yellow Ethernet cable provided to one of the ports marked ‘LAN’ at the back of the NF7.
2. Connect the other end of the yellow Ethernet cable to your computer.
3. Wait approximately 30 seconds for the connection to establish.
4. Open your Web browser, and enter
http://192.168.20.1 into the address bar and press enter.
5. Follow the steps to set up your NF7.
Connecting wirelessly
1. Ensure WiFi is enabled on your device (computer/laptop/Smartphone).
2. Scan for wireless networks in your area and connect to the network name that matches the Wireless network name
configured on the NF7.
Note: Refer to the included Wireless Security Card for the default SSID and wireless security key of your NF7
3. When prompted for your wireless security settings, enter the Wireless security key configured on the NF7.
4. Wait approximately 30 seconds for the connection to establish.
5. Open your Web browser, and enter
http://192.168.20.1 into the address bar and press Enter.
6. Follow the steps to set up your NF7.