User guide

XP-5R Beam F
37--
E. If The pan belt is broken
1. Turn off the mains power.
2. Loosen the screws (A)，open the cover (B).
3. Loosen the screws (C).
4. Unplug all the connect wires over the belt.
5. Change a new belt (D), put the belt around the
axis gear and motor gear.
6. Plug all the connect wires back upon the belt.
7. Tighten all the screws.
F. If The tilt belt is broken
1. Turn off the mains power.
2. Loosen all the screws (A) and open the right
arm cover (B).
3. Loosen the screws (C) that fix the bridge.
4. Change a new belt (E). Please adjust the
tension of the belt properly. Note: do not fix
the belt too tight as it is can easily rupture.
5. Reverse the procedures from step 3 to 2.