User guide

XP-5R Beam F

11--

2. Follow the Fig.3 and Fig.4: Loosen the two screws and apart the entire assembly

3. Follow the Fig.5 and Fig.6: Unplug all the connect wires over the lamp and wear

Anti-static gloves to take on the lamp

4. Change a new lamp

6. How to Set the Unit

6.1 Power On Display

Every time you turn on the unit, it will run built-in program to reset all motors to their home

position, the display will show as fig.4, you may hear some noises for about 20 seconds. It

will show warning sign if it goes wrong during resetting and you can press the MENU button

to view the error information. After that the unit will be ready to receive DMX signal and the

display will show as fig.5.

Fig3

Fig5

Fig6