User manual

29
Raloy
Manual
Switching Indication
Hardware Installation
Step 1
Connect the monitor to the RA15/17KVM16. Using the attached cable, or the one included with
your monitor, connect it to the HD DB-15 female port on the back of the KVM unit labeled with
the monitor symbol at the CONSOLE port connector.
Step 2
Connect the keyboard to the RA15/17KVM16. If you have an AT type keyboard, you will need
an AT to PS/2 adapter.
Step 3
Connect the mouse to the RA15/17KVM16.
Step 4
Now the PC connections will be made with the monitor (VGA) connections first. Connect a VGA
cable (15-pin HDDB Male / Male) with the Male side to both of the PC and the rear panel of the
RA15/17KVM16 to the connector labeled VGA. Repeat this for all PCs.
The rear side of PC