User manual

13
Raloy
Manual
On Screen Display for KVM Operation
When you pop up the OSD menu window go through the hot key, you will see the following
small window on your monitor.
a. The 1
ST
line bar is Bank no.
b. The 2
nd
block is your PC
system name list. You will find the
system number list from 01 to 8.
You can define your PC name in
maximum 8 characters. The
factory default names for all ports
is “SYSTEM 01”, to “SYSTEM
08“. Besides, the sun symbol “ ☼
“ near to the PC name represents
the PC system is powered on.
BANK : 1
01 SYSTEM 01 02
03
☼
SYSTEM 03 04
05
☼
SYSTEM 05 06
07 08
☼
SYSTEM 08 SYSTEM 07
SYSTEM 06
☼
SYSTEM 04
☼
SYSTEM 02 (
To use up arrow key “ y “ or down arrow key “ z “ to select port for destination PC name. After
you have selected the PC port already, you can press the ENTER Key to switch the PC port
you want immediately
©/ª: SELECT PORT
To use “ PgUp “ key or “ PgDn” key for selecting previous or next Bank no. (or Box No.)
PgDn/PgUp: BANK SELECT
To press “ INS” key for editing PC name. After finishing the edit, please press “ Enter “ key for
saving information.
TAB : NEXT INSERT :EDIT
ESC : QUIT ENTER :COMPLETE