User manual

LED-CTL6
 7A C. By universal DMX controller When using a universal DMX controller to control the chain of units, you have to set DMX address by Dip switches from 1 to 9 to make sure all the units will receive its DMX signal. Please refer to the following diagram to know how to address your DMX 512 system in the binary code. DMX 512 Address Chart
Dip #1 #2 #3 #4 #5 #6 #7 #8 #9 #10
Value 1 2 4 8 16 32 64 128 256 M/S
• Examples: Channel 1 : dip / on : #1 ( 1 )
Channel 5 : dip / on : #1, #3 ( 1+4 =5 )
Channel 9 : dip / on : #1, #4 ( 1 + 8 = 9 )
Channel 13 : dip / on : #1, #3, #4 (1+4+ 8 =13)
Blackout To blackout all the fixture Function 1.Synchronous strobe
in white 2. Sound strobe in white 3. Sound strobe in color
Select color 1. Red 2. Green 3. Orange 4. Pink 5. Yellow 6. Cyan 7.Blue 8.Magenta 9.White
Select chase
1-6
Mode Sound 1
(LED OFF)
Manual
(LED ON)
Sound 2
(LED slow blinking)
LED-CTL6
 4A 2. Technical Specification
y Input Voltage: AC 100/120/230/250V~50/60Hz
y Power consumption: 60W
y Light Source: 6×3W (3 in 1) LED y Fuse: T 3.15A (AC 100/120V)
T 2A (AC 230/250V)
y 4 Channels:
Channel 1 = Movement Channel 2 = Movement Speed Channel 3 = Color Macro Channel 4 = Color Macro Speed
y Dimension: 478 x 414 x 152 mm y Weight: 10kgs
y Luminous intensity: