Installation guide
5
PP-32
KOOLMASTER PP-32 REV.04
5.15 ADVANCED SETTINGS ....................................................78
5.15.1 Setting the Temperature Curve........................................ 78
5.15.2 Setting the Minimum Ventilation Curve ............................ 80
5.15.3 Humidity Control ......................................................... 82
5.15.3.1 Adjusting Relative Humidity Set Point ................................ 82
5.15.3.2 RH Compensation on Minimum Ventilation ......................... 83
5.15.3.3 Adjusting Mist or Kool-Cel Shutoff ..................................... 84
5.15.3.4 RH Compensation on Heaters' On-Time.............................. 84
5.15.4 Calibrating Sensors ....................................................... 86
5.15.4.1 Calibrating Room and Outside T° Sensors ......................... 86
5.15.4.2 Calibrating the Relative Humidity Sensor........................... 86
5.15.4.3 Calibrating the Static Pressure Level ................................. 87
6. TECHNICAL SPECIFICATIONS.................................... 89
7. FACTORY SETTINGS ................................................. 90
8. USING THE MEMORY STICK...................................... 91
8.1 LOAD A CONFIGURATION INTO THE CONTROLLER ..............91
8.2 SAVE A CONFIGURATION INTO THE MEMORY STICK ........... 92
9. INSTALLATION REPORT ............................................ 93
10. INDEX .................................................................... 98