Installation guide

45
PP-32
KOOLMASTER PP-32 REV.04
5.11 CLOCK OUTPUTS
The PP-32 has 4 clock outputs to control various devices, using the real-
time clock. Refer to the installation setup section to activate the clock
outputs (see sec. 5.14.3).
OPERATION OF CLOCK OUTPUTS 1 AND 2 :
The first 2 clock outputs can use up to 8 programs and each program has
up to 10 start and stop times. The user determines at what day each
program starts being used, this day is directly related to the animal age.
This is true for all programs except for program 1. The first program is
automatically enabled at day 1 (or at day 0 (Off)) and is deactivated when
the start age of the following program is reached. When a new program
starts, the previous program is deactivated. Refer to section 5.13.3 to
enable the proper number of clock programs for clock outputs 1 and 2.
An alarm is set off when a clock program that has not been properly set is
activated (this applies to clock programs 2-8). This means that an alarm
occurs whenever a clock program that has all the same start and stop times
(other than 12:00AM) is activated. In this case, the previous clock program
keeps on running until the defective program is corrected.
OPERATION OF CLOCK OUTPUTS 3-4 :
Clock outputs 3-4 operate using 10 start and
stop times.
ON / OFF 1
ON / OFF 2
ON / OFF 3
ON / OFF 4
ON / OFF 5
ON / OFF 6
ON / OFF 7
ON / OFF 8
ON / OFF 9
ON / OFF 10
PROGRAM 1
ON / OFF 1
ON / OFF 2
ON / OFF 3
ON / OFF 4
ON / OFF 5
ON / OFF 6
ON / OFF 7
ON / OFF 8
ON / OFF 9
ON / OFF 10
PROGRAM 2
ON / OFF 1
ON / OFF 2
ON / OFF 3
ON / OFF 4
ON / OFF 5
ON / OFF 6
ON / OFF 7
ON / OFF 8
ON / OFF 9
ON / OFF 10
PROGRAM 3
ON / OFF 1
ON / OFF 2
ON / OFF 3
ON / OFF 4
ON / OFF 5
ON / OFF 6
ON / OFF 7
ON / OFF 8
ON / OFF 9
ON / OFF 10
PROGRAM 4
ON / OFF 1
ON / OFF 2
ON / OFF 3
ON / OFF 4
ON / OFF 5
ON / OFF 6
ON / OFF 7
ON / OFF 8
ON / OFF 9
ON / OFF 10
PROGRAM 5
ON / OFF 1
ON / OFF 2
ON / OFF 3
ON / OFF 4
ON / OFF 5
ON / OFF 6
ON / OFF 7
ON / OFF 8
ON / OFF 9
ON / OFF 10
PROGRAM 6
ON / OFF 1
ON / OFF 2
ON / OFF 3
ON / OFF 4
ON / OFF 5
ON / OFF 6
ON / OFF 7
ON / OFF 8
ON / OFF 9
ON / OFF 10
PROGRAM 7
ON / OFF 1
ON / OFF 2
ON / OFF 3
ON / OFF 4
ON / OFF 5
ON / OFF 6
ON / OFF 7
ON / OFF 8
ON / OFF 9
ON / OFF 10
PROGRAM 8
CLOCK OUTPUTS 1-2
CLOCK OUTPUTS 3-4
ON / OFF 1
ON / OFF 2
ON / OFF 3
ON / OFF 4
ON / OFF 5
ON / OFF 6
ON / OFF 7
ON / OFF 8
ON / OFF 9
ON / OFF 10
ON
START
TIME = 8:00
OFF
STOP
TIME = 9:30
START TIME / STOP TIME DEFINITION