User manual

ACME Electronic Machinery Co., Ltd. ACME

2012/6/20

※3 Condition LED

1.Err LED(Error LED)－－This LED glow on express the measuring is occurred any

error. Please reset the power.

2.Q/D LED(1/4 or 1/10 LED)－－For 1/4 or 1/10 increment in last digit. This LED

glow on express it is 1/10 increment.

3.R/F LED(Round Off/Four Digits LED)－－This LED glow on express the value will

display by four digits. And in the round off case, when the last digit is 0,1,2,3 or 4, the

last digit will be cut off. In the other hand, when the last digit is 5,6,7,8 or 9, the last

digit will be change to zero and add 1 to the 2nd last digit.

3) Calculator

※Function Key

1.Off－－Power is off.

2.On－－Power is on, but no printing is performed.

3.Print－－Power is on and printer is operational.

4.Item ＋－－Power is on and printer is operational. The total number of items added

and subtracted is printed along with the result when you press the ◊/# or ＊ key.

Note: Please choose this item when you are measuring.

5.Item +/−－－Power is on and printer is operational. The total number of items added

less the total number of items subtracted is printed along with the result when you press

the ◊/# and ＊.

※Decimal modes selector

1.F－－Floating decimal.

2.CUT－－Values are cut off to the number of decimal places specified by the current

Decimal Place Selector setting.