User manual

ACME Electronic Machinery Co., Ltd. ACME
2012/6/20
7
Example：
D/F
05.09
05.10
05.11
05.14
05.15
D/R
05.1
05.1
05.1
05.1
05.2
Q/F
05.00
05.25
05.25
05.25
05.25
Q/R
05.2
05.2
05.2
05.2
05.2
D/F
05.24
05.25
05.34
05.35
05.40
D/R
05.2
05.3
05.3
05.4
05.4
Q/F
05.25
05.25
05.25
05.25
05.50
Q/R
05.2
05.2
05.2
05.5
05.5
D/F
05.64
05.65
05.94
05.95
06.00
D/R
05.6
05.7
05.9
06.0
06.0
Q/F
05.5
05.5
5.75
5.75
06.00
Q/R
05.5
05.7
05.7
06.0
06.0
D/F：1/10 and Four Digits
D/R：1/10 and Round Off
Q/F：1/4 and Four Digits
Q/R：1/4 and Round Off
6.－－Increase number.
7.－－Decrease number.
8.－－Move cursor rightward.
9.－－Move cursor leftward.
Note: 6)~~9) are used in adjustment in BCHST and CMPST.
10.Enter－－When the number of BCHST or CMPST was adjusted, it is necessary to
push “Enter Button” to input the number. If never do this action, the predetermination
setup will lost.
11.RST－－Clear the data of BTT and GTT.
12.Format－－Clear all the data of BTT、GTT、CMPST and BCHST。