User manual

ACME Electronic Machinery Co., Ltd. ACME
2012/6/20
11
5、Troubleshooting
※Measuring Machine
Pro 1－－No Read Out
Cause: Power is off
Solution: Turn on power.
Cause: Encoder driver Belt drop out
Solution: Open the front cover to check the encoder driver belt whether on the right
position or not. If not, put the belt on the right position.
 Cause: Control Box does not connect with Machine.
Solution: Check the connector does connect correctly.
Pro 2－－0000 Readout
Cause: There is any spot on the P.C. Tube.
Solution: Clean the P.C. Tubes by using only copper/brass polish on non-abrasive clean
agent. It is important to keep the tube clean and lucent.
Pro 3－－Power switch is on, but machine does not work.
Cause: Breaker was turn off.
Solution: Turn on the breaker.
※Calculator
Pro 1－－Can not print.
Solution: Check the connector does connect correctly.
Solution: Check the selector does put in the right position.
Pro 2－－The number of calculator printed different from control box appear.(Ex: The
control box display 47.5, but Calculator prints 4.5. the 7 was lost)
Cause: Interface is breakdown.
Solution: Call for fixing, or purchase a new interface.