User guide
on
-
8
D
-
4.2 Remotely Set DMX Address
1. Hold on the BLACKOUT/STAND ALONE button for 3 seconds to
enter Stand-Alone mode.
2. Hold down the SCANNERS button and then press BLACKOUT/
STAND ALONE button. You will see the pan & tilt of all the fixtures
in the chain stopping at the central position. The shutter & LED of
the first fixture will open/ blink indicating the fixture is active, ready
to be designated a new position ( the number in the chain ).
3. If you have two chains in the venue, you can jog ( push ) joystick
Left/Right to select chain 1 or chain 2, and jog joystick Up / Down to
select next fixture or last fixture.
4. Select 1~12 button to set DMX address.
5. Press SCANNERS to next page to select 13~24 button for setting
DMX address.
6. Press the BLACKOUT/STAND ALONE button again to return to the
program mode.
Fixtures No. 1 2 3 4 5 6 7 8 9 10 11 12
DMX channel for
Moveing Head
Scanner
Barrel
1 9 17 25 33 41 49 57 65 73 81 89
Color changer
Multi-Gobo projector
3 11 19 27 35 43 51 59 67 75 83 91
Fixtures No. 13 14 15 16 17 18 19 20 21 22 23 24
DMX channel for
Moving Head
Scanner
Barrel
97 105 113 121 129 137 145 155 161 169 177 185
Color changer
Multi-gobo projector
99 107 115 123 131 139 147 157 163 171 179 187
on
-
13
D
-
4.4.1 Create a Scene
1. Enter Program mode.
2. a.)Press Scanners button to choose the fixtures you want to control
b.)Use Joystick or sliders to locate the positions of pan/tilt to create a
scene.
3. Press SAVE. The 1~12 buttons will light up if they have memory
already saved into them.
4. Press a button to store your desired scene.
5. The scene is saved into the selected button.
6. By pressing PAGE, you can also store scenes into 13~24 button.
4.4.2 Create a Chase
1. Enter Program mode.
2. Create a scene.
3. Press SAVE button. Select a position ( 1 ~ 24 ) where you want to
store the scene.
4. Repeat steps 2 & 3 as many times as you want until the controller’s
memory is full. The SAVE LED will blink when the memory is full.
5. A chase (The controller ) can store up to 485 scenes.