User guide

ManualsBrandsACME ManualsFlood LightiSolution

Technical Specification

Power Input .................…………………………..…..DC 9-12V 300 mA min

DMX Input .............................................……………………3 pin male XLR

DMX Output .........................................……………….....3 pin female XLR

Stand Alone…………………………………………………….5 pin male XLR

MIDI Signal ................................……….….……....5 pin standard interface

Audio Input .....................……………….....By built-in microphone or line in

Dimensions ........................................……….…..….... 485 x 135 x 80 mm

Weight(appro.) ................................................…….………………... 2.5 kg

Innovation, Quality, Performance

IL-0824

User Guide

Please read these instructions carefully before use

Summary of content (11 pages)

PAGE 1
Technical Specification Power Input .................…………………………..…..DC 9-12V 300 mA min DMX Input .............................................……………………3 pin male XLR DMX Output .........................................……………….....3 pin female XLR Stand Alone…………………………………………………….5 pin male XLR MIDI Signal ................................……….….……....5 pin standard interface Audio Input .....................……………….....By built-in microphone or line in Dimensions ........................................……….…..….
PAGE 2
CONTENTS 1. Features…………………………………………………………………………………..…2 Note 2. General Instructions…………………………………………………………………..……3 3. Overview……………………………………………………………………………….….…4 3.1 Front View……………………………………………………………………………….…4 3.2 Rear View………………………………………………………………………………….6 4. Operation Guide…………………………………………………………………………….7 4.1.1 Program Mode…………………………………………………………………………..7 4.1.2 Blackout Mode…………………………………………………………………………..7 4.1.3 Stand Alone Mode………………………………………………………………………7 4.
PAGE 3
1.
PAGE 4
2. General Instructions MIDI note Note name Function 36 C3 Chase 1 Please read the user manual carefully as it includes important information regarding details 37 C#3 Chase 2 of operation, maintenance, and technical data. Keep this manual with the unit for future 38 D3 Chase 3 consultation.
PAGE 5
3. Overview When in Auto mode, you can set the light speed and fade time by using the sliders. These settings will be kept when next time you run the same light show. When in Sound mode activation, the Light show will be triggered by music, however, you can still set the fade 3.1 Front View time of the light show. 4.7.1 Override Control When running light shows, you can press the Override button to control the fixture manually, the LED lights up indicating Override function is activated.
PAGE 6
4.5.2 Delete a Chase 1. Enter Program mode. 2. To set the tilt position of the Scanners when programming or to set the tilt movement range for Movement function 2. Press MEMORY button. or to set DMX value 0~255 for channels of Shutter/Gobo/ Color/Rotation/Dimmer/Focus. 3. Hold down MEMORY button and then press a 1~12 button or press 19. Speed ( Wait time ) Controls with two different functions: 1. To set chase speed ( wait time between scenes ) within PAGE to select a 13-24 button to delete a chase.
PAGE 7
3.2 Rear View 4.4.5 Overwrite a Scene 1. Enter Program mode. 2. Press the MEMORY button. 3. Press the button ( 1 ~ 24 ) where the memory ( chase ) is saved and 1. POWER Turns On/Off the power. select the scene that you wish to overwrite. 2. DC INPUT DC 9 ~12V, 300mA min. Press the same button ( e.g. 6 ) repeatedly, you can view the scene 3. FOG MACHINE 5 pin din socket for connecting DC Fog Machine. one by one. 4. STROBE Trigger non-DMX strobe. Signal +12V DC. 4. Create a desired scene. 5.
PAGE 8
4.4.3 Running Scenes 4. Operation Guide 1. Enter Program mode. You can easily control pan, tilt, shutter, gobo, color, rotation, dimmer and focus functions on the lighting fixtures by pressing the relevant buttons showing on the control panel. With the 2. Press MEMORY button. use of joystick/ sliders, you will be able to quickly set the fixtures’ Pan or Tilt position to make scenes. You can then save all these scenes step by step in a memory to create a chase 3.
PAGE 9
4.2 Remotely Set DMX Address 4.4.1 Create a Scene 1. Hold on the BLACKOUT/STAND ALONE button for 3 seconds to enter Stand-Alone mode. 1. Enter Program mode. 2. a.)Press Scanners button to choose the fixtures you want to control b.)Use Joystick or sliders to locate the positions of pan/tilt to create a scene. 2. Hold down the SCANNERS button and then press BLACKOUT/ 3. Press SAVE. The 1~12 buttons will light up if they have memory already saved into them. STAND ALONE button.
PAGE 10
4.3.7 Setting GOBO ROTATION 4.3.1 Select the fixtures you want to control Ø Select the fixtures you want to control Ø Press SCANNERS button Ø Press ROTATION button Ø You can choose one or more than one fixtures by pressing the 1~12 buttons Ø Select a rotation speed value with 1~12 buttons, or move the X-Fade/Value Ø When the buttons’ LED ( 1 ~ 12 ) are lit, you can control the fixtures.
PAGE 11
4.3.4 Setting SHUTTER 4.3.6 Setting COLOR Ø Select the fixtures you want to control Ø Select the fixtures you want to control Ø Press SHUTTER button Ø Press COLOR button Ø Select a shutter value with the 1~12 buttons, or use the X-Fade/Value slider Ø Select a color value with the 1~12 buttons, or move the X-Fade/Value slider. Ø To select strobing speed 13~24, press SHUTTER again to next page the Ø To select colors 13~24, press COLOR again to next page, the lower LED lower LED will be on.