Specifications

3. Lamp

MSD 250/2 GY 9.5 (IR-7S/7B/IR-5C) CDM 150W ( IR-6SD/ IR-6BD )

ELC 24V 250W (IR-6S/IR-6B/IR-5S/IR-5B/ IR-4C/IS-6S/IS-6B/IS-4/IS-3)

Diagram for lamp changing

Because of its high internal pressure, there might be a

risk that the Discharge lamp would explode during

operation. The lamp emits intense UV radiation which

is harmful to the eyes and skin. The high luminance of

the arc can cause severe damage to the retina if looks

directly at t he lamp.

1. Always switch off the main supply and never handle

the lamp or luminaries when is hot.

2. Do not t ouch the bulb with bare hands. If t his

happens, clean the lamp with denatured alcohol and

wipe it with a lint f ree cloth before installation.

3. The lamp generates UV radiation. Never operate the

lamp without appropriate shielding.

4. When burning, the lamp operates at high pressure and

there is a slight risk of arc tube rupture. The risk

increases with age, temperature and improper

handling of the lamp. Do not use the lamp any

longer than its specified life.

Make sure the lamp is located in the center of the

reflector for the best spot.

IR-7S/7B/5C ( IR-5C is a 5 channel color changer )

In case of replacement of the lamp or maintenance, do not open the

fixture within 15 minutes until the unit cools down after switching off.

MSD 250/2

CDM 150W

ELC 24V 250W