Specifications

11F
5.2 Easy Controller
The easy remote control is used only in master/slave mode. By
connecting to the 1/4” microphone jack of the first unit, you will find
that the remote control on the first unit will control all the other units
as below.
Built-in lighting shows triggered by Easy Controller:
Stand by Blackout the unit
Function Strobe
1.Gobo/Color sync. strobe
2.Sync. strobe
3.Two-light strobe
X/Y moving pattern selection
( 12 patterns )
Color/Gobo selection
1. Hold on for gobo change.
2. Press shortly for color
change.
X/Y moving setting
1.Pan position
2.Tilt position
3.Dimmer
IR-7S
IR-7B
IR-6SD
IR-6BD
IR-6S
IR-6B
IR-5S
IR-5B
Mode Sound 1
(LED off )
Sound 2
(LED normal blinking)
Slow/Sound 3
(LED on)
Position/ Latch
(LED fast blinking )
Stand by Blackout the unit
Function Strobe
1.Gobo/Color sync. strobe
2.Sync. strobe
3.Two-light strobe
Chase pattern selection
( 6 patterns )
Color/Gobo selection
1. Hold on for gobo change.
2. Press shortly for color
change.
Dimmer setting
IR-5C
IR-4C
Mode Sound 1
(LED off )
Sound 2
(LED normal blinking)
Slow
(LED on)
Latch
(LED fast blinking )
Stand by Blackout the unit
Function Strobe
1.Gobo/Color sync. strobe
2.Sync. strobe
3.Two-light strobe
X/Y moving pattern selection
( 12 patterns )
Color/Gobo selection
1. Hold on for gobo change.
2. Press shortly for color
change.
X/Y moving setting
1.Pan position
2.Tilt position
IS-6S
IS-6B
Mode Sound 1
(LED off )
Sound 2
(LED normal blinking)
Slow/Sound 3
(LED on)
Position/ Latch
(LED fast blinking )
Stand by Blackout the unit
Function Strobe
1.Gobo/Color sync. strobe
2.Sync. strobe
3.Two-light strobe
Gobo/Color selection
1.Hold on for gobo change.
2.Press shortly for color change.
IS-4
Mode Sound
(LED off )
Slow
(LED on)
Stand by Blackout the unit
Function Strobe
1.Gobo/Color sync. strobe
2.Sync. strobe
3.Two-light strobe
Gobo/Color selection
IS-3
Mode Sound
(LED off )
Slow
(LED on)
X/Y moving pattern
Press the MENU button up to when the is showing on the display. Pressing ENTER
button and the display will blink. Use DOWN and UP button to select the (normal) or
(2 light show) mode or (3 light show) mode or (4 light show). Once
the mode has been selected, press the ENTER button to setup or automatically return to the
main functions without any change after 8 seconds. To go back to the functions without any
change press the MENU button again.
Blackout Mode
Press the MENU button up to when the is showing on the display. Pressing ENTER
button and the display will blink. Use DOWN and UP button to select the (yes
blackout) or (no blackout) mode. Once the mode has been selected, press the
ENTER button to setup or automatically return to the main functions without any change after
8 seconds. To go back to the functions without any change press the MENU button again.
Color Mode
Press the MENU button up to when the is showing on the display. Pressing ENTER
button and the display will blink. Use DOWN and UP button to select the (normal) or
(split color) mode. Once the mode has been selected, press the ENTER button to
setup or automatically return to the main functions without any change after 8 seconds. To go
back to the functions without any change press the MENU button again.
Pan Inversion
Press the MENU button up to when the is showing on the display. Pressing ENTER
button and the display will blink. Use DOWN and UP button to select the (normal) or
(pan inversion) mode. Once the mode has been selected, press the ENTER button to
setup or automatically return to the main functions without any change after 8 seconds. To go
back to the functions without any change press the MENU button again.
Tilt Inversion Barrel Rotation Inversion
Press the MENU button up to when the ( ) is showing on the display.
Pressing ENTER button and the display will blink. Use DOWN and UP button to select the
(normal) or (tilt/barrel rotation inversion) mode. Once the mode has been
selected, press the ENTER button to setup or automatically return to the main functions
without any change after 8 seconds. To go back to the functions without any change press the
MENU button again.