User guide

4I
2. Technical Specification
• Voltage：AC 120V~60Hz or 230V/240V/250V~50/60Hz
• Bulb：HID 150W
ELC 24V 250W
• The unit is DMX 512 fixture. It features full DMX 512 control. It can be
also linked together
in master/slave connection, as many as required and run by built-in program chase
sequences automatically or by sound activation through an internal microphone to create
an intelligent effect.
• It can be operated by DMX 512 control or can be used as an individual unit without a
controller.
• Consistent DMX channel enable iRock, iShow and iMove to be link together.
• Features different preprogrammed chase patterns.
• Please use a 3 pin XLR cable/plug when connecting
units together.
•
Accurate focusable optics system and ultra smooth stepping motors. Fan cooled.
• Pan : 540 deg. Tilt : 270 deg.
• Dimension : 290 x 330 x 380 mm
• Weight : 12 kg
Move Spot Independent gobo wheel with 14 gobos plus open and blackout, including 11
metal, 2 glass and 1 effect gobos with shaking and shutter effect, Independent
color wheel with 11 dichroic colors with rainbow effect.
Move Wash Independent color wheel with 11 dichroic colors with rainbow effect and
independent shutter & dimmer.
2.1 Beam Angle
5I
3. Lamp
Lamp :
HID 150W
ELC 24V 250W
1. Always switch off the main supply and never handle the lamp or luminaries when is
hot.
2. Do not touch the bulb with bare hands. If this happens, clean the lamp with denatured
alcohol and wipe it with a lint free cloth before installation.
3. Never operate the lamp wi thout appropriate shielding.
4. Make sure the lamp is located in the center for the best spot.
Diagram for Lamp changing
In case of replacement of the lamp or maintenance, do not open the fixture
within 15 minutes until the unit cools down after switching off.