Specifications

78
Tech Support: 855-ONE-ZURN
www.zurn.com
Model ZW1017MM Master Mixing Valve
• 3/4”, 1”
• Outlet temperature range 95 – 120°F
• Set temperature accuracy ±5°F
• Factory set 117°F
• High flow capacity ~ 30 gpm @ 45 psi pressure loss
• Used at hot water source to mix hot and cold water in order to reduce
the temperature of the hot water in the distribution system to 120°F or
less
• ASSE
®
Listed 1017, CSA
®
Certified
Model ZW1017MM Supplied with three FNPT tailpieces and
union nuts
Model ZW1017MMC Supplied with three female copper sweat
tailpieces and union nuts
Model ZW1017MMCPVC Supplied with three female CPVC tailpieces
and union nuts
OptionsTypical Installation Features
The Wilkins Model ZW1017MM Aqua-Gard master mixing valve, when installed at the hot
water source, is designed to mix hot and cold water in order to reduce the temperature of the
hot water in the distribution system to 120°F(48.9°C) or less. The ZW1017MM superior ac-
curacy ensures safe water temperature from minimum to maximum flow rate. Further, multiple
end configurations make this valve suitable for most light commercial installations.
WARNING: this device should never be installed at the point of use where the end user could
change its setting. Point of use device must be of the ASSE 1016 variety. It is recommended
that the ZW1017MM be installed with a shut-off valve and thermometer in the tempered
water line to provide accurate and safe water mixing temperatures.
Applications
COLD WATER
DIRECTION OF FLOW
HOT WATER
WATER HEATER
SAFE DRAIN
TO HOT
APPLIANCES
MODEL TP1100A
T & P RELIEF VALVE
MODEL ZW1017MM
AQUA-GARD
TEMPERING
MIXING VALVE
TEMPERED WATER
Model ZW1017MMM Supplied with three MNPT tailpieces and
union nuts
Model ZW1017MMPEX Supplied with three male PEX tailpieces
and union nuts
For Additional Information, reference WK-AG catalog or visit
our web site.
Thermostatic Mixing Valves