Specifications

77
Tech Support: 855-ONE-ZURN
www.zurn.com
Model ZW1017
• 3/8”, 1/2”, 3/4”, 1”
• Tempering Mixing Valve
• Certified to ASSE Standard 1017
• CSA
®
Certified
• Flow Capacity ~ 18 gpm @ 45 psi pressure loss
• Systems distribution application. Not to be used at point of use
• Outlet temperature range of 95° – 131°F
• Integral check valves and stainless steel strainers
(no strainer in 38-ZW1017 comp)
Model ZW1017 Supplied with three FNPT tailpieces and
union nuts
Model ZW1017C Supplied with three female copper sweat
tailpieces and union nuts
Model ZW1017COMP Supplied with three 3/8" compression
tailpieces and union nuts
Model ZW1017CPVC Supplied with three female CPVC tailpieces
and union nuts
OptionsTypical Installation Features
The Wilkins Model ZW1017 Aqua-Gard tempering mixing valve, when installed at the hot water
source, is designed to mix hot and cold water in order to reduce the temperature of the hot water
in the distribution system to 122°F(50°C) or less. The ZW1017’s superior accuracy ensures safe water
temperature from minimum to maximum flow rate. Further, multiple end configurations make this
valve suitable for all residential and most light commercial installations.
WARNING: This device should never be installed at the point of use where the end user could change
its setting. Point of use device must be of the ASSE 1016 variety. It is recommended that the ZW1017
be installed with a shut-off valve and thermometer in the tempered water line to provide accurate and
safe water mixing temperatures, to be used in conjunction with ASSE 1016 device.
Applications
COLD WATER
DIRECTION OF FLOW
HOT WATER
WATER HEATER
SAFE DRAIN
TO HOT
APPLIANCES
MODEL TP1100A
T & P RELIEF VALVE
MODEL ZW1017
AQUA-GARD
TEMPERING
MIXING VALVE
TEMPERED WATER
Model ZW1017M Supplied with three MNPT tailpieces and
union nuts
Model ZW1017PEX Supplied with three male PEX tailpieces and
union nuts
For Additional Information, reference WK-AG catalog or visit
our web site.
Thermostatic Mixing Valves