Specifications

65
Tech Support: 855-ONE-ZURN
www.zurn.com
Solenoid Control Valve – ZW106
• 1
1
/
4
”, 1
1
/
2
”, 2”, 2
1
/
2
”, 3”, 4”, 6”, 8”, 10”
• Valve is furnished either normally open (de-energized solenoid to open)
or normally closed (energize solenoid to open)
• Ductile iron body and bonnet ASTM-A536 epoxy coated. Bronze (ASTM
B62) trim and pilots
• Single seated, diaphragm actuated, hydraulically operated, electrically-
actuated pilot controlled
• Maximum temperature 180°F
• Pressure rated Class 150 250 psi max.
• Globe or angle configurations available (specify when ordering)
For Additional Information, reference WK-ACV catalog or visit
our web site.
OptionsTypical Installation Features
The ZW106 is a pilot operated solenoid valve that either opens or closes upon receiving an electri-
cal signal. The ZW106 is a perfect valve to use with the Wilkins 375MS and EST. In this application,
the ZW106 is used to stop water flow should the relief valve of the backflow prevention assembly
begin to discharge. Not limited to this application, the ZW106 can be used anytime it is advanta-
geous to open or close a line electrically rather than mechanically. The ZW106 can be equipped
in either a normally open (energize to close) or a normally closed (energize to open) configuration.
Applications
Backflow Preventer Accessories