Specifications

25
Tech Support: 855-ONE-ZURN
www.zurn.com
OptionsTypical Installation
Model 950XLV FNPT x FNPT with 90° swivel elbows
Model 950XLVS Supplied with wye strainer
Model 950XLVSH Supplied with stainless steel handles
Model 950XLVFT Supplied with fast-test test cocks
For Additional Information, reference WK-BPC catalog or visit
our web site.
Model 950XLV Series Double Check Valve With Elbows
Features
• 3/4”, 1”
• Double check valve assembly consisting of two independently operated
spring-loaded wye type center guided check valves
• 90° elbow on inlet and outlet allows for easy conversion to different
configurations
• Compact design reduces space requirements for protective enclosures
• Eliminates the need for pipe elbows, nipples and unions
• Bronze body construction
• Complete with two full port resilient seated ball valves for shut-off and
four resilient seated ball valve test cocks
• Noryl replaceable seats and silicone rubber check discs
• Entire unit serviceable in line
• Temperature range 33°F – 180°F
• Maximum pressure 175 psi
• Available with stainless steel handles (optional)
• ASSE
®
Listed 1015, IAPMO
®
Listed (3/4” size), AWWA (3/4” size)
Building on the proud tradition of the Wilkins 950XL, the 950XLV was created with the installer in
mind. Equipped with swivel union elbows, the 950XLV offers installation flexibility in non-health hazard
applications where other competitive double check valve assemblies fall short. The swivel union
elbows are perfect for those installations that demand either a vertical up-up or up-down configura-
tion. Saving the installer time equates to increasing the installers profit margin, and the 950XLV is
designed to accomplish this goal.
 Thermal expansion tank (Model XT)
 Quick test set (QT-SET)
Local codes shall govern installation requirements. To be installed in accordance with the manufacturers’ instructions and the latest
edition of the Uniform Plumbing Code. Unless otherwise specified, the assembly shall be mounted at a minimum of 12” (305mm) and
a maximum of 30” (762mm) above adequate drains with sufficient side clearance for testing and maintenance. The installation shall be
made so that no part of the unit can be submerged.
 Test cock lock (Model TCL24)
 Ball valve monitor switch (Model BVMS)
12" MIN.
30" MAX.
12" MIN.
MODEL 950XLV MODEL 950XLV
30" MAX.
BASEMENT
FLOOR
Accessories Applications
Backflow Preventers