User`s manual

5
GB
operation
Itisrecommendedtousethekettleforseveraltimesfollowinginstructionsgivenbelowandtoremoveremaining
waterbeforerstusage.Thiswillremoveanymaterialsordustremainedintheappliancefromthemanufacturing
process.
1.OpenthelidbyturningtheLidupwhilepressingtheLidbuttonandpourwaterintothekettle.Thenreplacethe
lid,otherwisethekettlewouldnotbeabletoturnothepowerautomaticallyafterwaterhasboiled.
Caution: the lled water level must be between the “Max” and “Min” level as indicated on the housing. Too little water
will damage the heat element and if the kettle is overlled, boiling water may splash out.
2.Replacethekettleonthepowerbaseandconnecttopowersupply.Positionthekettlesothatthespoutofthe
kettleisfacingawayfromyou.
3.Presstheswitchbuttonto“I”positionandthelightwillashon.Andwaterwillstarttoheatup.Donotopenthe
lidwhilethewaterisboiling.
Caution: Ensure that the switch is clear of obstructions and the lid is rmly closed. The kettle will not turn o if the switch
is constrained or if the lid is left open.
4.Powerwillbecutoautomaticallyandtheswitchwillbebackto“0”positiononcewaterhasbeenboiled.And
thelightwillbeo.
5.Liftthekettlefromthepowerbaseandthenpourthewater.
Note: Be careful when pouring water from the kettle, as boiling water
may cause scalding.
6.Theboilingprocesscanbeterminatedatanytimebyliftingthe
kettleothepowerbaseorpressingtheswitchto“0”position.
caution
• Neverusetheappliancewhenitisempty.Ifsuchsituationwilloccur,thethermalcut-oinsidethekettlewould
turnothepowerautomatically.Unplugtheapplianceandletitcooldowncompletely.
• Theltermustbeinplaceduringtheworkoftheapplianceotherwisewaterspillagemayoccur.
Note: Ensure the power is turned o while the kettle is not in use.