User Guide

Table Of Contents

7.2.3 Give Change Function

① After weighting, the display will show the total price;

② Press [CHG] key to enter Give Change function;

③ Input the amount received;

④ Press [CHG] key to give change.

Note: Give Change function is not allowed if the paying amount is less than total. Press [C/ESC] key to

exit this function.

7.2.4 Tare Function

① Put the container or wrapper on the scale tray;

② Press [Tare] key to enter weight-deducting status;

③ Put the item into the container or wrapper. The LCD will display the net weight.

④ Remove the item after weighing;

⑤ Press the [Tare] key, the scale will return to normal weighting status.

7.2.5 Pending order & Accumulation Function

Take Customer1 [C1] as an example. Please follow below steps:

① Weight the PLU under normal sales weighing status;

② Press [C1] key to carry out pending and accumulate operation for the first customer’s commodity;

③ Repeat the above steps to accumulate the pending orders of the first customer's commodity one by one.

The LCD screen will display the total weight of the commodity, the number of transactions and the total

price as shown in the following picture;

④ Press the [C1] key continuously to get the cumulative record and transaction details of the first

customer’s pending order one by one;

⑤ Press the [C/ESC] key to clear the accumulated records of all pending orders of the first customer.

Note: This scale can perform pending orders, accumulation and record operations for five customers ([C1]-

[C5] keys). The operations between the five customers can be carried out cross-over without affecting each

other. Each customer can accumulate up to 25 records.

C1's total transactions

C1's total commodity weight

C1's total price

1．050 kg

Unprocessed

customers

30.12

1 ALL 3

Customer1