BR1X SCANNER USER MANUAL Pinnacle Technology Corp.
CONTENT 1. Distinguish BT/2.4G/Wired Model ................................................................................................................ 1 1.1 1.2 Side View ................................................................................................................................................ 1 Nameplate ............................................................................................................................................... 2 2. Charge .....................
1. Distinguish BT/2.4G/Wired Model 1.1 Side View Wireless Model (BT/2.
1.2 Nameplate Wired Model: N: Wired Model Bluetooth: B: Bluetooth 2.4G: W: 2.4G 2. Charge Only the wireless model (BT/2.4G) BR1 needs to be charged, the wired model BR1 doesn’t needs to be charged. 2.1 Wireless Model (BT/2.4G) Place the wireless model (BT/2.4G) BR1 on the charging base, LED indicator lightens: ①Orange light slow flash indicates that the BR1 is charging. ②Orange light keeps on indicates charging full. 2.
3. Configuration 3.1 Wired Connection After connecting the wired model BR1 to PC with USB communication cable, scanning operation can be carried out. 3.2 Wireless Pairing (1)2.4G Communication Model: ①Connect charging base and PC with communication cable. ②Scan ‘2.4G/Bluetooth Mode Select’ code underneath the charging base; While the scanner sounds ‘Bi’, it indicates that the scanner is in 2.4G Mode. 2.4G/Bluetooth Mode Select ③Unplug the communication cable.
3.3 Continuous reading Scan ‘Continuous reading’ code, and then press the trigger key to read barcode, after that the scanner can continuously read barcode without pressing the trigger key.
FCC Statement: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
