User's Guide

COMPANY CONFIDENTIAL
Wireless Field Programming Coil
Aclara Technologies, LLC
User Guide (DRAFT)
Rev. 1.3
Page 10 of 10
February 19
2 MTU Programmer Setup
The following section outline the general procedure for placing the programmer at the time of
reading or writing one MTU.
1. Turn on the device as indicated at 1.1.
2. Find the programmer point on the MTU.
3. Slide the programming probe onto the side of the MTU, so that the circular face of the
programmer is flush against the programmer point on the MTU.
The programmer should be positioned as shown
WARNING Do not place hand between the round face of the programmer and the MTU. RF
Exposure is not compliant in that face.