User's Guide

14 A c l a r a R F E l e c t r i c I - 2 1 0 + c U s e r G u i d e
Meter Accommodations
2. This device must accept any interference, including interference that may
cause undesired operation of the device.
ISED Certification
This device has been ISED certified. The meter AMI label (ref. Figure 4.2) will list
the various certified components located within the enclosure by their IC ID.
RF Exposure
This device has been tested for exposure of humans to RF energy. It satisfies
OSHA, FCC, and Health Canada requirements provided it is installed in a manner
described in this manual and operated in accordance with the user guide.
Listing
This device may be UL listed. The meter nameplate will display the UL logo if this
is the case.
Meter Accommodations
The Aclara RF Network I-210+c may be configured for demand-only,
demand/load profile, Time of Use (TOU), TOU/demand metering, or
TOU/demand meter with load profile metering.
Number of TOU tiers supported: 4
Timekeeping Battery: Optional; the NIC will determine if a functional battery is
present and accommodate accordingly.
The NIC will discover the meter’s LP configuration and report all enabled
channels.
The NIC will discover how the meter measures demand and normalize the
reported value to be in kW or kVAr (as appropriate).
Supported Meter Forms
Table 4.2 Supported meter forms
ANSI Meter Form
1S, CL100, 120V (both with and without a Remote Disconnect switch)
2S, CL200, 240V (both with and without a Remote Disconnect switch)
2S, CL320, 120/240V
3S, CL20, 240V
3CS, CL20, 240V
4S, CL20, 240V
12S, CL200, 120V (both with and without a Remote Disconnect switch)