User's Guide

Chapter 5 • Features
A c l a r a R F E l e c t r i c I - 2 1 0 + c U s e r G u i d e 41
NOTES Additional measurements may be supported in a future firmware release.
The I-210+c includes harmonics in its measurements. To obtain a
“fundamental only” measurement of energy one must use a meter such as the
KV2c.
0.8.6.0.0.1.4.0.0.0.0.0.0.0.32.0.5.0
maximum fiveMinute
electricitySecondaryMetered current
phaseC (A)
R2
0.0.0.6.0.1.4.0.0.0.0.0.0.0.32.0.5.0
indicating electricitySecondaryMetered
current phaseC (A)
R2
0.9.7.0.0.1.4.0.0.0.0.0.0.0.32.0.5.0
minimum sixtyMinute
electricitySecondaryMetered current
phaseC (A)
R2
0.9.5.0.0.1.4.0.0.0.0.0.0.0.32.0.5.0
minimum thirtyMinute
electricitySecondaryMetered current
phaseC (A)
R2
0.9.2.0.0.1.4.0.0.0.0.0.0.0.32.0.5.0
minimum fifteenMinute
electricitySecondaryMetered current
phaseC (A)
R2
0.9.6.0.0.1.4.0.0.0.0.0.0.0.32.0.5.0
minimum fiveMinute
electricitySecondaryMetered current
phaseC (A)
R2
0.2.7.6.0.1.4.0.0.0.0.0.0.0.32.0.5.0
average sixtyMinute indicating
electricitySecondaryMetered current
phaseC(A)
R2
0.2.5.6.0.1.4.0.0.0.0.0.0.0.32.0.5.0
average thirtyMinute indicating
electricitySecondaryMetered current
phaseC (A)
R2
0.2.2.6.0.1.4.0.0.0.0.0.0.0.32.0.5.0
average fifteenMinute indicating
electricitySecondaryMetered current
phaseC (A)
R2
0.2.6.6.0.1.4.0.0.0.0.0.0.0.32.0.5.0
average fiveMinute indicating
electricitySecondaryMetered current
phaseC (A)
R2
0.2.7.6.0.1.46.0.0.0.0.0.0.0.0.0.23.0
average sixtyMinute indicating
electricitySecondaryMetered temperature
(°C)
R2
0.2.5.6.0.1.46.0.0.0.0.0.0.0.0.0.23.0
average thirtyMinute indicating
electricitySecondaryMetered temperature
(°C)
R2
0.2.2.6.0.1.46.0.0.0.0.0.0.0.0.0.23.0
average fifteenMinute indicating
electricitySecondaryMetered temperature
(°C)
R2
0.2.6.6.0.1.46.0.0.0.0.0.0.0.0.0.23.0
average fiveMinute indicating
electricitySecondaryMetered temperature
(°C)
R2
Table 5.4 LP Measurements Supported with NIC Firmware Version 1.70
IEC 619689-6 Appenidx C Code IEC 61968-9 Description
Required
Softswitches