User's Manual

6 SRFN I-210+ Field Installation Instructions

Installation Instructions

When installing the Synergize RF module, enter the following information into the

system:

1. Record the GPS coordinates of the meter face to the sixth (6) decimal place.

2. Record the current date and time.

3. Scan the bar codes to enter the meter number, and MAC ID.

4. Take a zoomed-in picture of the meter face.

5. Take a zoomed-out picture of the meter face, including surrounding

features.

6. Turn 90 degrees to your right, and take a picture.

7. Turn 90 degrees to your right, and take another picture.

8. Turn 90 degrees to your right, and take one more picture.

9. With your back to the meter face, document the compass direction the meter

face is pointing. Record the direction in whole degrees, keeping in mind

that north is 0°, east is 90°, south is 180°, and west is 270°.

AUTIONS

In order to avoid damage to the equipment, correct meter-socket wiring

should always be verified when installing the meter.

From the meter nameplate, verify that the type, class, voltage, and form are

compatible with the installation.

OTE

These instructions assume that an in-range DCU has already been installed,

and properly configured with a valid time.

DRAFT 8-17-17