User's Manual

Test Instruction
101-9975T-SRFN User Manual 3
4. Launch the Final Test – 9975T application.
5. Select Setup, and set the correct Comm Properties.
6. Click the Get Port Names button.
7. Select the correct COM Port Name for the cable that is plugged into the 9975T
board.
8. Click the Connect button.
9. Select Read Configuration, and verify communications response from the
9975T.
10. Select Set MAC Network ID and set MAC Network ID to 0.
11. Click the Configure Board button.
12. Verify all receive channels are set to the correct frequency.
DRAFT