User Instructions

Final Assembly of SCG DCU
Document No.: AP-1X700-003-MAD Rev. D Page 9 of 12
Proprietary Document and Information of Aclara
Uncontrolled when printed unless marked ‘Controlled’ or ‘Production Copy’ with a date in red
4.3 Placement of product labels.
4.3.1 Refer to Figure 7 for installation of
the DCU FCC/IC ID label.
Clean the surface of the enclosure
with Isopropyl Alcohol.
Place the fixture in the orientation
shown. Align the fixture square with
the top-left corner of the enclosure
cover using the guide rail and the top
edge of the fixture as shown.
Remove the paper from the adhesive
back of the label.
Hold the fixture firmly in place and
use the reference edges of the fixture
to position the DCU FCC/IC ID label.
Verify the label position is square to
the corner of the cover then press
down all edges of the label firmly by
hand.
Figure 7: Install DCU FCC/IC ID Label
091-11700-SCG-1
DCU ID Label
FIX-1X700-001
Fixture