User Instructions

Final Assembly of SCG DCU
Document No.: AP-1X700-003-MAD Rev. D Page 8 of 12
Proprietary Document and Information of Aclara
Uncontrolled when printed unless marked ‘Controlled’ or ‘Production Copy’ with a date in red
4.2.9 Connect the bonding jumper to the enclosure cover as shown in Figure 6.
4.2.10 Test security switch hardware per procedure 465-11700-02-PTI.
Upon successful completion of test, the operator shall place their stamp on a clearly visible
location of the switch bracket. The mark may be used by QA as a visual queue that the security
switch hardware was verified to function properly after the DCU cover was installed.
069-3202A
Split Washer
069-3201A
Flat Washer
070-10700
Bonding Jumper
Figure 6: Connect Bonding Jumper
069-3215LS
7/16"
35 in-lb