User Instructions

Final Assembly of SCG DCU
Document No.: AP-1X700-003-MAD Rev. D Page 6 of 12
Proprietary Document and Information of Aclara
Uncontrolled when printed unless marked ‘Controlled’ or ‘Production Copy’ with a date in red
4.2.2 Add the Installation & Maintenance Record form
with vinyl sheet protector to the inside of the
enclosure cover as shown in Figure 4.
Clean the inside surface of the enclosure cover with
Isopropyl Alcohol to remove any oil or
contaminants.
Remove paper backing from the sheet protector.
With the red zipper seal towards the top edge of the
cover, center the sheet protector on the inside of the
cover as shown and smooth down by hand.
4.2.3 Check form F-700-0100 provided with the DCU by
the Test Technician:
 DCU ID on form and ALL (3) ID Labels
inside DCU match.
 Model on form matches the Item Number on
the work order.
 Final test date and technician must be filled
out.
4.2.4 Insert form F-700-0100 into the sheet protector.
4.2.5 Check that the Test Technician provided the remaining
portion of the SimCard similar to the one shown in
Figure 4B. Cards from different service providers,
such as Sprint or Verizon, may look different.
 Verify the DCU ID is written on the back of the
card with black permanent marker and matches
up with the appropriate DCU.
4.2.6 Insert the remaining portion of the SimCard into the
sheet protector on top of the maintenance form, so that
it is clearly visible.
4.2.7 Fully seal the the zip lock top of the sheet protector.
Figure 4B: Sample Sim Card
Sim Card Was Here