Technical Manual
Table Of Contents
- Table of Contents
- Product Specifications
- Warnings, Cautions, and Notes
- Introduction
- Commissioning
- Tools Required
- Connect to the Main Board
- Commission the DCU
- Installer Commands
- Global Commands
- Administrator Commands (for an LTE Backhaul)
- Alarm Menu
- Manufacturing Menu
- MTU Menu
- Transceiver Menu
- Records Menu
- Power Supply Debug Menu
- Transceiver Debug Menu
- Advanced Menu
- Global Navigation Satellite System (GNSS) Menu
- Maintenance
- Troubleshooting
- Testing the DCU
- Local Menu “WALL” Command Information
- DCU-Generated Headend Messages
- Index
68 D C U M a i n t e n a n c e a n d O p e r a t i o n M a n u a l
Gateway Config = NONE
The Gateway type (STAR/SRFN/NONE) indicates what type of network data the headend
should route to this T-board.
• The NONE state is typically only used on 1 T-Board in an electric-only DCU 2+
containing two T-Boards.
• T-Boards with a gateway=NONE send registration, hourly T-Board statistics, and
hourly RSSI statistics.
• T-Boards with a gateway=NONE will not be used by Headend to send data to
endpoints.
SRFN mac channnel sets =
467362500,467362500,
456000000,458000000,,,,,,,,,,,,,
,,,,,,,,,,,,,
These channels identify the frequencies that a SRFN message will select when
transmitting. The first two values in the set define the range.
STAR mac channnel sets =
466600000,468000000,
456000000,458000000
These channels identify the frequencies that a SRFN message will select when
transmitting. The first two values in the set define the range.
Transceiver 2 Channel
Configuration
The following Transceiver 2 rows provides the frequencies assigned to the slot 2 T-Board
radios.
Rx Channel 1 000000000
INACTIVE
Slot 2 Radio 1 Frequency. '000000000' or 'INACTIVE" used if radio is off
Rx Channel 2 000000000
INACTIVE
Slot 2 Radio 2 Frequency. '000000000' or 'INACTIVE" used if radio is off
Rx Channel 3 000000000
INACTIVE
Slot 2 Radio 3 Frequency. '000000000' or 'INACTIVE" used if radio is off
Rx Channel 4 000000000
INACTIVE
Slot 2 Radio 4 Frequency. '000000000' or 'INACTIVE" used if radio is off
Rx Channel 5 000000000
INACTIVE
Slot 2 Radio 5 Frequency. '000000000' or 'INACTIVE" used if radio is off
Rx Channel 6 000000000
INACTIVE
Slot 2 Radio 6 Frequency. '000000000' or 'INACTIVE" used if radio is off
Rx Channel 7 000000000
INACTIVE
Slot 2 Radio 7 Frequency. '000000000' or 'INACTIVE" used if radio is off
Rx Channel 8 000000000
INACTIVE
Slot 2 Radio 8 Frequency. '000000000' or 'INACTIVE" used if radio is off
Tx Channel SRFN 467362500
SRFN
Frequency used for SRFN transmit messages and time syncs (Slot 2 Radio 9)
Field Example Description