Technical Manual

D C U M a i n t e n a n c e a n d O p e r a t i o n M a n u a l 61
APPENDIX
B
LOCAL M ENU “WALL” C OMMAND I NFORMATION
Field Example Description
FW Stamp: 03.20.0012 Mainboard CPU firmware version.
UserMode: Full Access Current access permissions.
DCU Unit Number: 021499 DCU ID; this will be either a 5 or 6 digit value.
DCU PCB Number: 021499
The DCU PCB is typically just set to the above DCU ID value; however, recommend setting
to the Fusion base Y-Number (i.e. DCU2+ Y63156 would be 63156).
31.035195 Lat, -85.523459 Lon
This parameter represents the physical location of the DCU (East and North are positive
values).
In the DCU 2+, this value may be entered at the local menu, but will be overwritten by
the internal GPS immediately if the GPS has an adequate satellite fix.
After power-up, the value may take up to 2 minutes to populate (fix on 4 or more
satellites).
Telit LE910 (101-2013-002M4) Cell phone, model number, and Aclara part number.
Phone#: [phone]
Cell phone number; this information is obtained after the first call. After each power-up,
this will display NO DATA until the next call.
IMEI: 351999098277575 Displays the serial number of the cellular socket modem.
ICCID: 89148000004649367813
Displays the SIM card identification number. After each power-up, this will display NO
DATA until the next call.
F/W: 17.01.571 Firmware version of the socket modem FW.
Carrier: Verizon Cell carrier.
H/W: 0.00 Hardware version of the cell phone, if applicable.
10T/100TX Ethernet
(101-9975C)
Denotes that the DCU is equipped with an Ethernet-capable mainboard. The text would
read "Fiber" for direct fiber-capable connections.