Technical Manual
Table Of Contents
- Table of Contents
- Product Specifications
- Warnings, Cautions, and Notes
- Introduction
- Commissioning
- Tools Required
- Connect to the Main Board
- Commission the DCU
- Installer Commands
- Global Commands
- Administrator Commands (for an LTE Backhaul)
- Alarm Menu
- Manufacturing Menu
- MTU Menu
- Transceiver Menu
- Records Menu
- Power Supply Debug Menu
- Transceiver Debug Menu
- Advanced Menu
- Global Navigation Satellite System (GNSS) Menu
- Maintenance
- Troubleshooting
- Testing the DCU
- Local Menu “WALL” Command Information
- DCU-Generated Headend Messages
- Index
30 D C U M a i n t e n a n c e a n d O p e r a t i o n M a n u a l
Global Navigation Satellite System (GNSS) Menu
Global Navigation Satellite System (GNSS) Menu
This menu allows the user to configure the GNSS.
If a user attempts to obtain data from the system shortly after power-up, or shortly
after issuing the RESET GPS command, the system will reply with an “unable to
access information” message. Information should become available once the
system has fully restored.
Command Description
1 Disable GPS UTC time usage
2 Disable GLONASS
3 Set C/NO threshold
4 Display position-velocity-time info
5 Display satellite info
6 Reset GPS
? Help