Technical Manual
Table Of Contents
- Table of Contents
- Product Specifications
- Warnings, Cautions, and Notes
- Introduction
- Commissioning
- Tools Required
- Connect to the Main Board
- Commission the DCU
- Installer Commands
- Global Commands
- Administrator Commands (for an LTE Backhaul)
- Alarm Menu
- Manufacturing Menu
- MTU Menu
- Transceiver Menu
- Records Menu
- Power Supply Debug Menu
- Transceiver Debug Menu
- Advanced Menu
- Global Navigation Satellite System (GNSS) Menu
- Maintenance
- Troubleshooting
- Testing the DCU
- Local Menu “WALL” Command Information
- DCU-Generated Headend Messages
- Index
Chapter 4 • Commissioning
D C U M a i n t e n a n c e a n d O p e r a t i o n M a n u a l 29
Transceiver Debug Menu
The Transceiver debug menu provides options for troubleshooting the transceiver.
Advanced Menu
The debugging/advanced menu provides options for general troubleshooting of the
main board.
Command Description
1 Enable verbose
2 Hardware rev
3 MAC address
4 Test modulation
? Help
Command Description
1 Restore factory defaults
2 Enable Gen1 mode
3 Enable poll records
4 Perform software reset
5 Set modem type
6 Set bolt-on board type
7 MTU F/W upgrade status
8 Channel spacing frequency
9 Delayed 2-way time to live
10 Read physical memory
11 Disable power management
12 Enable XML RF packet decode
13 Duplicate packet filtering
? Help