Technical Manual
Table Of Contents
- Table of Contents
- Product Specifications
- Warnings, Cautions, and Notes
- Introduction
- Commissioning
- Tools Required
- Connect to the Main Board
- Commission the DCU
- Installer Commands
- Global Commands
- Administrator Commands (for an LTE Backhaul)
- Alarm Menu
- Manufacturing Menu
- MTU Menu
- Transceiver Menu
- Records Menu
- Power Supply Debug Menu
- Transceiver Debug Menu
- Advanced Menu
- Global Navigation Satellite System (GNSS) Menu
- Maintenance
- Troubleshooting
- Testing the DCU
- Local Menu “WALL” Command Information
- DCU-Generated Headend Messages
- Index
28 D C U M a i n t e n a n c e a n d O p e r a t i o n M a n u a l
Transceiver Menu
Transceiver Menu
The transceiver menu allows the user to view and change the transceiver settings,
including transmission and reception frequencies.
Records Menu
The records menu allows the user to generate, display, and erase records.
Power Supply Debug Menu
The power supply debug menu provides options for troubleshooting the battery
and charging circuit. These commands may be used to assert local control over the
charging system.
N
OTE
Historical charging data is available in AclaraONE.
Command Description
1 Set transceiver channel
2 Front end gain
3 Available frequencies
4 DCU command
? Help
Command Description
1 Display normal records
2 Display alarm records
3 Generate test records
4 Generate alarm records
5 Erase all records
6 Accept bad CRCs
? Help
Command Description
1 Disable/enable verbose mode
2 Read LTC4015 Reg
3 Set battery size
? Help