Technical Manual
Table Of Contents
- Table of Contents
- Product Specifications
- Warnings, Cautions, and Notes
- Introduction
- Commissioning
- Tools Required
- Connect to the Main Board
- Commission the DCU
- Installer Commands
- Global Commands
- Administrator Commands (for an LTE Backhaul)
- Alarm Menu
- Manufacturing Menu
- MTU Menu
- Transceiver Menu
- Records Menu
- Power Supply Debug Menu
- Transceiver Debug Menu
- Advanced Menu
- Global Navigation Satellite System (GNSS) Menu
- Maintenance
- Troubleshooting
- Testing the DCU
- Local Menu “WALL” Command Information
- DCU-Generated Headend Messages
- Index
Chapter 4 • Commissioning
D C U M a i n t e n a n c e a n d O p e r a t i o n M a n u a l 27
Alarm Menu
The alarm menu allows the user to set DCU alarm settings.
Manufacturing Menu
The manufacturing menu provides access to information and tests.
MTU Menu
The MTU menu provides settings for configuring and troubleshooting MTUs.
Command Description
1 Enable auto dial out
2 Interval time
3 Types/alarms masks
4 Enable readings w/alarms
? Help
Command Description
1 Test memory
2 DCU PCB serial number
3 Set transceiver ch
4 Set MTU baud rate
5 Read LTC4015 Reg
? Help
Command Description
1 Enable MTU debug
2 Target MTUs
3 Query MTUs
4 Sent time sync
5 Time sync schedule
6 Enable Series 3000 time syncs
7 Display scheduled commands
8 Display queued commands
9 Display delayed commands
10 Erase scheduled commands
11 MTU F/W upgrade status
12 Abort MTU F/W upgrade
13 Gutermann configuration
? Help