Installation Instructions

ManualsBrandsAclara Technologies ManualsElectronicsTRANSCEIVER FOR METER READING

1

2

3

Table Of Contents

MTU Instruction

for Landis & Gyr S4 Electric Meters

Procedure

Step 1 – Guide the Type 9845 printed

circuit board assembly into the open S4

Family meter housing as shown in the

photo below. The two antennae must be

aligned with the corresponding cavities on

the sides of the housing

Step 2 – Close the housing as shown

here, aligning the faceplate with the

mounting posts on the body of the

housing.

Step 3 – Attach the faceplate to the body

of the housing by inserting and tightening

the required screws.

Page 2