Installation Instruction

8
Sprague/Actaris Gas MTU Installation Instructions
4. Align the magnet in the new index cover to the recess in the MTU.
5. Secure the cover to the MTU using the four remaining #10 x 1/2” screws. Tighten each screw to
10-12 inch pounds.
6. Install the four anti-tamper plugs in the index cover screw towers.
Putting the Device into Service
Program the MTU using the STAR Programmer
To take the device out of service, follow the steps in the STAR Programmer in reverse order.
MTU ID Label Examples