Installation Instruction

8
Elster American Gas Meter MTU Installation Instructions
4. Place the new cover over the index and align the magnet in the index cover so that it seats in the
recess in the MTU.
5. Align the index cover with the mounting holes on the MTU, and secure it using the four #10x1/2"
screws.
6. Tighten the four #10x1/2" screws to 8-12 inch-pounds. The index cover gasket will be compressed
slightly.
CAUTION! Do not over tighten screws. Excessive torque may damage the MTU enclosure.
7. Install the four Tamper Plugs in the index cover screw towers.