Installation Instruction

7
Elster American Gas Meter MTU Installation Instructions
Mount MTU Assembly to Meter
1. Insert the four 1/4-20 X 1.5" screws through the holes on the MTU.
2. Align MTU gear opening with the wiggler on the meter.
3. Tighten the four 1/4-20 X 1.5" mounting screws to 12-16 inch-pounds.
CAUTION! Do not over tighten screws. Excessive torque may damage the MTU enclosure.
Note: Gear shown below is detached from the MTU for illustration purposes only.