User's Manual

MTU Installation Requirements 25
CHAPTER 0APPENDIX
A
C HAPTER 0 E QUIPMENT
This appendix provides a detailed list of tools and supplies for specific installation types.
*NOTE MTU Installations under metallic pit lid require additional tools and supplies. Please
see the Meter Pit Antenna Installation Instructions (Y63129-TUM) for more
information.
Tools Indoor Outdoor Pit*
Staple gun X X
Flashlight X X X
Diagonal cutters X X X
Wire stripper X X X
Flat-tip screwdriver X X X
Phillips head screwdriver X X X
Cordless drill/driver with flat and phillips bits X X X
1/4" General purpose/twist drill bit, standard length X X
1/4" x 12" General purpose/twist drill bit X
Connector crimping tool X X X
Safety glasses X X X
Known good meter register X X X
Known good MTU X X X
Supplies Indoor Outdoor Pit*
Nylon cable ties (for indoor wire routing only) X
Stainless steel cable ties X X X
9/16" Rounded-crown staples X
#6 x 1" Plastic anchors for screws X X
#6 x 1 5/8" Drywall screws X
#8 x 2 1/2" 18/8 Stainless steel screws X X
RTV silicone sealant X X
Electrical tape X X
3 Conductor, 22 AWG, solid copper wire w/black jacket X X
3 Conductor, 22 AWG, solid copper wire w/gray jacket X X
Gel-filled, insulation displacement connectors (Aclara #043-1913) X X X
Direct burial splice kits (Aclara #043-1912) X
Meter Pit Antenna X
Short MTU spacers (Aclara #056-8150S) X
Long MTU spacers (Aclara #056-8150L) X
DRAFT