User's Manual
Table Of Contents
18 MTU Installation Requirements
Meter Pit
When mounting to a non-metallic pit lid, the MTUs must be mounted with the
Aclara logo facing the pit lid. Screws and cable ties used in pit installations must
be 18/8 (SAE Type 304) stainless steel.
Without Spacers
Some manufacturers design pit lids with a mounting space for the MTU on the
bottom of the pit lid. When installing an MTU to one of these pit lids, the MTU
mounting tabs sit directly against the pit lid. Spacers are not needed for these lids.
DRAFT