User's Manual

22 MTU Installation Requirements
Connections
Connections
Please refer to the specific connector manufacturer for detailed installation
instructions. The connectors must be installed according to the manufacturer’s
instructions.
C AUTION It is important that you do not damage the insulation of the inner conductors
when removing the outer jacket.
Please consult the appropriate meter installation instructions for specific MTU
wiring instructions.
Interior/Exterior Environment
Interior and exterior connections must be made with UL and RUS listed moisture
and solvent resistant Insulation Displacement Connectors IDCs (Aclara P/N
043-1913).
Wires must not be stripped when using IDCs, and the wires must be fully inserted
into the connector prior to crimping. Refer to the manufacturer’s installation
instructions for more information.
DRAFT