User's Manual

STAR Programmer Software
Series 4000 Maintenance and Operations Manual 17
Operation
The STAR Programmer menu functions for Series 4000 MTUs are Read MTU, Turn Off MTU,
Add MTU, Install Confirmation, and Replace Battery. Each of these functions are described in the
following sections.
Read MTU
This option allows the user to read information
from the MTU and the instrument. It will also
write configuration settings to the instrument.
Select this option to see the current MTU
settings or after changing a battery that has
not
completely lost power. When the user selects
the Read MTU option:
1) Select Read MTU.
2) Wait while the STAR Programmer reads
the MTU.
3) After viewing the MTU information screen,
select
OK to log the activity and return to
the Main Menu.
Turn Off MTU
This option allows the user to deactivate and
turn off a previously commissioned MTU.
When a Series 4000 MTU has been turned off,
the STAR Programmer software will read the
MTU Type, firmware version, and MTU ID
before turning off the MTU. The MTU will
cease all RF transmission and will only
respond to commands sent through the USB
port.
1) Select Turn Off MTU.
2) Wait while the application reads and turns
off the MTU.
3) Click OK to log the activity and return to the
Main Menu.
DRAFT