User's Manual

STAR Programmer Software
Series 4000 Maintenance and Operations Manual 9
Software
The STAR Programmer application may be used to commission an MTU after installation, read
and troubleshoot an MTU in the field, or to turn off an MTU if it will not be in use for an extended
period of time. Actions performed using the STAR Programmer software are logged and
uploaded to the Network Control Computer (NCC) for verification at the end of each shift.
Prerequisites
The STAR Programmer application requires the following to communicate with a Series 4000
MTU:
Tablet or laptop with
• Windows® 7
• > 1.5 GHz
• > 2 GB RAM
• > 80 GB HDD
• Open USB port
USB-A to USB-B cable (Aclara #070-1700)
DRAFT